An old organ technician told me something amusing. He says that the relay shown here is a MAJOR weak spot in the Sideman’s design. It was custom made for Wurlitzer, it’s a high-impedance coil that burns out easily, and replacements are impossible to find. It has 12 poles–ever tried to buy a 12-pole relay? The […]

If only one could buy such a mechanical monster today — preferably with MIDI output. I was told that lots of Sidemen got scrapped simply because that rubber belt broke, and the owners were too old/senile to get it fixed…..sounds like ageism to me. My question is: 50 years from now, will you be able […]

The electronics chassis. Tube complement is one 6AV6, two 6C4, one 6BA6, and five 12AX7s. The trimpots control the resonance of the bandpass filters that make the drum tones. “SHIMMER GENERATOR” controls the decay time of the noise-based cymbal sounds. The inside of this chassis is quite impressive. Maybe later. (Does anyone out there have […]

The drum-pattern selector. Dunno about you, but this has to be the tallest rotary switch I’ve ever seen….it’s almost a foot long….gotta feel sorry for the poor Mississippi housewives who handwired these things, for 75c per hour. (Sidemen were made in Corinth, MS.)

This is the control panel. It’s quite difficult/costly to get that kind of chemically-etched brass panel made today. The BLOCKS and CYMBALS knobs are rotary selectors that provide five different variations for block and cymbal patterns, plus totally disabling them. I must assume some of those home organists found a use for this–because the amount […]

Here is the left side. 9 tubes in the sound section, and a power amp made with a 12AX7 and two 6BQ5s. 2-way speaker with two tweeters, one coaxial with the woofer and the other on the front of the cabinet, under the control panel. The big aluminum disk turns the contact arm–it is driven […]

I’m fixing this one for a friend. Introduced 1958. In this view we see the “pattern sequencer” — a large printed circuit board (the only one in the unit) with a set of contacts on a rotating arm. The contacts close circuits and generate trigger pulses, which hit vacuum-tube ringing filters to generate most of […]